{
 "currentVersion": 10.91,
 "serviceDescription": "Naturally_Occurring_Asbestos",
 "mapName": "Layers",
 "description": "Naturally-occurring asbestos in NSW\n \n\nFor more information, please read the report at: http://www.workcover.nsw.gov.au/__data/assets/pdf_file/0016/30418/WC01788-0715-297174.pdf\n \n\nThis collection of datasets aims to select areas where there is potential for naturally occurring asbestos to occur within about 10 m of the surface throughout New South Wales. The areas are based on based on the existing 1:250,000 geological mapping with additional use of 1:25 000 lithological mapping in the Broken Hill area. The datasets also include point data information on sites where naturally occurring asbestos has been found, and petrographic information on asbestos and its host rocks.\n\nThe different layers can be switched on or off (and their transparency adjusted) by clicking the \"Layers\" icon at the bottom of the screen. Clicking on a polygon or point will return more detailed attribute information. The map has been restricted to only zoom to approximately 1:80,000, reflecting the maximum accuracy of the underlying mapping data. \n\nAuthors: NSW Trade & Investment, Resources and Energy, 2013\n\nUse limitations and Disclaimer\nThe information contained in this publication is based on the knowledge and understanding at the time of writing (June 2013). However, because of advances in knowledge, users are reminded of the need to ensure that information upon which they rely is up to date and to check the currency of the information with the appropriate officer of the Department of Trade and Investment, Regional Infrastructure and Services (\"the Department\") or the user's independent adviser. The Department also recommends that before relying on any information contained in the publication, users should carefully evaluate its relevance for their purposes, and should obtain appropriate professional advice relevant to their particular circumstances.\n \nWhile the Department has taken all reasonable care to ensure that the content of this publication is accurate, adequate, current and complete, it does not represent or warrant its accuracy, currency or completeness (including, without limitation, any information in the publication provided by third parties). To the extent permitted by law, the Department and the State of New South Wales excludes any liability, including liability for negligence, for any loss, including indirect or consequential damages arising from or in relation to the use of any information contained within this publication\nNote - The areas shown on maps with this report were based on the published geological mapping which was completed at different scales and may not be recent.\n ",
 "copyrightText": "Division of Resources & Energy",
 "supportsDynamicLayers": false,
 "layers": [
  {
   "id": 0,
   "name": "POINT OCCURRENCE DATA",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": [
    1,
    2,
    3,
    4,
    5
   ],
   "minScale": 0,
   "maxScale": 0,
   "type": "Group Layer"
  },
  {
   "id": 1,
   "name": "Mineral Occurences - Asbestos Sites",
   "parentLayerId": 0,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 2,
   "name": "Petrological (Microscopic) Site - Asbestos",
   "parentLayerId": 0,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 3,
   "name": "Petrological (Microscopic) Site - Chrysotile",
   "parentLayerId": 0,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 4,
   "name": "Petrological (Microscopic) Site - Fibrous Tremolite",
   "parentLayerId": 0,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 5,
   "name": "Mineral Occurrences - Serpentinite Host",
   "parentLayerId": 0,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPoint"
  },
  {
   "id": 6,
   "name": "BROKEN HILL  - GEOLOGICAL UNITS WITH ASBESTOS POTENTIAL ",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": [
    7,
    8,
    9
   ],
   "minScale": 0,
   "maxScale": 0,
   "type": "Group Layer"
  },
  {
   "id": 7,
   "name": "Retrograde Ultrabasic Dykes with MEDIUM asbestos potential",
   "parentLayerId": 6,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon"
  },
  {
   "id": 8,
   "name": "Dykes with HIGH asbestos potential",
   "parentLayerId": 6,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon"
  },
  {
   "id": 9,
   "name": "Geological Units with HIGH asbestos potential",
   "parentLayerId": 6,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon"
  },
  {
   "id": 10,
   "name": "STATEWIDE - GEOLOGICAL UNITS WITH ASBESTOS POTENTIAL",
   "parentLayerId": -1,
   "defaultVisibility": true,
   "subLayerIds": [
    11,
    12,
    13
   ],
   "minScale": 0,
   "maxScale": 0,
   "type": "Group Layer"
  },
  {
   "id": 11,
   "name": "Geological Units with HIGH asbestos potential",
   "parentLayerId": 10,
   "defaultVisibility": true,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon"
  },
  {
   "id": 12,
   "name": "Geological Units with MEDIUM asbestos potential",
   "parentLayerId": 10,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon"
  },
  {
   "id": 13,
   "name": "Geological Units with LOW asbestos potential",
   "parentLayerId": 10,
   "defaultVisibility": false,
   "subLayerIds": null,
   "minScale": 0,
   "maxScale": 0,
   "type": "Feature Layer",
   "geometryType": "esriGeometryPolygon"
  }
 ],
 "tables": [],
 "spatialReference": {
  "wkid": 4283,
  "latestWkid": 4283
 },
 "singleFusedMapCache": false,
 "initialExtent": {
  "xmin": 148.78365190643646,
  "ymin": -33.49765825001323,
  "xmax": 149.75542378121756,
  "ymax": -32.775349198629314,
  "spatialReference": {
   "wkid": 4283,
   "latestWkid": 4283
  }
 },
 "fullExtent": {
  "xmin": 141.17387780600006,
  "ymin": -37.07752999999997,
  "xmax": 152.9388697160001,
  "ymax": -29.079878191924877,
  "spatialReference": {
   "wkid": 4283,
   "latestWkid": 4283
  }
 },
 "minScale": 0,
 "maxScale": 0,
 "units": "esriDecimalDegrees",
 "supportedImageFormatTypes": "PNG32,PNG24,PNG,JPG,DIB,TIFF,EMF,PS,PDF,GIF,SVG,SVGZ,BMP",
 "documentInfo": {
  "Title": "Naturally Occurring Asbestos",
  "Author": "Director Mine Safety Performance",
  "Comments": "The areas are based on the existing 1:250,000 geological mapping with additional use of 1:25 000 lithological mapping in the Broken Hill area. The datasets also include point data information on sites where naturally occurring asbestos has been found, and petrographic information on asbestos and its host rocks. \nThe different dataset layers can be switched on or off (and their transparency adjusted) by clicking the 'Layers' icon at the bottom of the screen. Clicking on a polygon or point will return more detailed attribute information. The map has been restricted to only zoom to approximately 1:80,000, reflecting the maximum accuracy of the underlying mapping data.  For more information visit http://www.epa.nsw.gov.au/clm/natural-asbestos.htm or http://www.safeworkaustralia.gov.au/sites/swa/whs-information/asbestos/pages/asbestos ",
  "Subject": "Areas within NSW where naturally occurring asbestos has been found, or has the potential to be found within 10 metres of the surface. ",
  "Category": "",
  "AntialiasingMode": "None",
  "TextAntialiasingMode": "Force",
  "Keywords": "Naturally_Occurring_Asbestos"
 },
 "capabilities": "Map,Query,Data",
 "supportedQueryFormats": "JSON, geoJSON",
 "exportTilesAllowed": false,
 "referenceScale": 0,
 "datumTransformations": [
  {
   "geoTransforms": [
    {
     "wkid": 108001,
     "latestWkid": 1241,
     "transformForward": true,
     "name": "NAD_1927_To_NAD_1983_NADCON"
    }
   ]
  },
  {
   "geoTransforms": [
    {
     "wkid": 108001,
     "latestWkid": 1241,
     "transformForward": false,
     "name": "NAD_1927_To_NAD_1983_NADCON"
    }
   ]
  }
 ],
 "supportsDatumTransformation": true,
 "maxRecordCount": 1000,
 "maxImageHeight": 4096,
 "maxImageWidth": 4096,
 "supportedExtensions": "KmlServer"
}